Available in
branches of

DS-SB Set Back Dial Thermostat

The Solfex DS-SB is our flush mount set back thermostat ideal for those wanting a simple but energy efficient control system. The DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected.

The DS-SB thermostat has been designed to work in conjunction with our UH8 wiring centre and TM4 Programmer, but could equally be used as a standalone dial thermostat.

Please note this thermostat is flush mounting, so a back box is required prior to installation.

DS-SB Install Guide

Features include:

  • Slide switch mode select (Constant, Off, Time Clock)
  • Flush Mount
  • 05-35°C Temperature Range
  • 4°C Set Back Function
  • 230V 3A Switch Rating
  • 2 Years Warranty
  • CE Approved

TM4-TS 230v 4 Channel Timeclock

The Solfex TM4 is a 4 Zone Programmer, designed to work with our UH3 wiring centre, but could equally be used to replace standard programmers.

Programmers are often difficult to understand, made worse by the fact that they are used infrequently.

The TM4 touch screen interface makes operation a doddle.

TM4-TS Data Sheet

Features include:

  • 4 Zones
  • Each Zone can be set to work in 5/2 or 7 day mode
  • 4 Switching Times per Day
  • Holiday Facility
  • Boost Facility
  • Copy Facility
  • Mode Select (Auto, Constant, Off)

Slimline Programmable Thermostat

The SOLFEX Slimline is our 230v programmable room stat and programmer in one, providing up to 4 different temperatures at different times of the day.

The Slimline Thermostat offers remote air sensor facility (Remote Sensor Optional).

SLIMLINE Install Guide

Features include:

  • 5/2 Day or 7 Day Programming
  • Self Learning Optimum Start
  • 4 Comfort Levels per Day
  • Temperature Hold Facility
  • Holiday Facility
  • Flush Mounting
  • °C/ °F Selectable
  • Key Locking
  • Frost Protection
  • 2 Years Warranty

UH4 Wiring Centre

The SOLFEX UH4 can be used in conjunction with our mains thermostats. The UH4 is also ideally suited for underfloor heating. When used for under-floor heating an option is available to use zone 4 for conventional radiator control.

Features include:

  • The UH4 provides central switching of up to 4 zone actuators
  • Output for a hot water cylinder and the system boiler and pump.
UH4 Install Guide

UH8 Wiring Centre

Up to 8 zones can be controlled from the UH8.

On board the UH8 are two heating time channels, each zone allows you to specify which time channel it should follow. 2 additional time channel connections are provided for hot water control or other auxiliary devices.

On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.

UH8 Install Guide